Kentaur Jump Saddle Configurator NAXOS

Jumping saddle with a medium-deep tree and flat latex panels for better contact with the horse. The saddle features medium knee rolls with pre-formed saddle flaps and offers good seat stability due to the medium-deep seat. The seat and knee area are made of non-slip leather.

Information on configuring Kentaur saddles

1. Saddle Trees

CARBON Saddle Tree
The tree consists of several layers. It ensures lightness, absolute dimensional stability, durability, strength, elasticity, and stability. It is thin yet possesses the ability to absorb shocks. This significantly improves contact between rider and horse. Replaceable and adjustable gullets, available in 5 sizes, in combination with this saddle tree, offer a unique product on the current world market.

GRP Saddle Tree
Alternatively, to the Carbon tree, we offer the economical version. A saddle tree made purely of fiberglass, which is 300g heavier, but identical in shape and size to the Carbon tree. In the area of the gullet point, it is reinforced with carbon and Kevlar fibers.

WEBFLEX Saddle Tree
The Webflex tree is a classic flexible saddle tree reinforced lengthwise with a steel spring. The gullet used here is replaceable and adjustable.

2. Gullets

The saddle trees are reinforced in the wither area with a metal gullet. This reinforcement is replaceable and adjustable. It is possible to change the width of the gullet (in cold condition), directly on the saddle, with the help of a press machine, by a maximum of 2 cm. A larger bend can cause molecular changes, which alter the material and reduce its strength.
Following gullet sizes
1 - narrow 2 - medium 3 – medium-wide 4 – wide 5 – extra-wide
For the correct determination of the gullet size, we recommend the following steps:
1) Using a measuring wire, form the outline of the wither approximately two finger widths behind the rear edge of the shoulder blade.
2) Measure the internal angle.

Chamber:
1 – Angle 63° 2 – Angle 73° 3 – Angle 83° 4 – Angle 93° 5 – Angle 99°
This measurement is only a guide and cannot be used for the production of a custom saddle.
The length of the gullet is the same for all sizes. However, it is possible to extend it by 1, 2, or 3 cm.

3. Saddle Panels

Panel Height
For horses with high withers and a deep backline, it is necessary to support the rear area of the saddle with higher saddle panels. It is possible to produce wool panels with a standard wedge height or increased wedge by +1, +2 or +3 cm.

Wool Panels
Full synthetic wool is used to fill the panels, which adapts to the horse's back. This wool remains soft and flexible even after prolonged use. Wool-filled panels are very comfortable for the horse, have excellent absorption capabilities, and can be individually adjusted to the horse's back. Multiple layers under the wool ensure a smooth and even surface of the panels.
3mm LP foam reinforces the tensile strength of the leather
10 mm PU foam gives the panel a pleasant softness
5mm felt ensures higher stability of the panels

Felt Panels (French)
The middle part of these panels is filled with synthetic wool, wrapped in felt, and finally covered with leather. This type of panel is very comfortable for the horse and maintains its height (thickness) very well. It has no edge and can be individually shaped.

Latex Panels
The filling of the panel consists of polyurethane foam. The advantage of this panel is its property of offering riders close contact with the horse, and its shape does not change even after long use. The panel is not adjustable; it can only be adapted to the horse's back with a pad.

4. Saddle Flaps

Saddle flaps of the jumping saddle
They have their standard size and cut on each model. Upon request, a larger forward cut of +2 cm or +4 cm can be ordered. With a larger forward cut, the length of the saddle flap automatically increases.

Saddle flaps of the dressage saddle

They have the same length on all models (measured from the lower stirrup bar edge to the end of the saddle flap).
Seat size 16.5" 17" 17.5" 18" 18.5"
Standard flap length 41 cm 43 cm 45 cm 47cm 49 cm

Upon customer request, it is possible to produce the saddle flap in a longer or shorter version, plus 2.5 cm, plus 5 cm, minus 2.5 cm, or minus 5 cm.

5. Leather

Leather Qualities
Only high-quality hides from first-class Italian, German, and French tanneries are used for the production of our products. The following options are available:

Leather for saddle flaps:
1) Standard Leather - vegetable-tanned leather with a smooth surface
2) Country Leather - high-quality, oiled leather that is soft and non-slip. Also available in a printed version.
3) Double Calf Leather - consists of standard leather covered with soft calf leather. Very comfortable version.

6. Colors:

Most Kentaur saddles are available in the following colors:
• Black
• Dark Brown
• Tobacco

Saddle Identification

From January 2018, every Kentaur saddle is marked with the production number, size, gullet width, and additional information regarding its adjustment.
The first letter of the production number indicates the saddle tree type.
W / C / G (WEBFLEX / CARBON / GRP)

K +1, +2, +3 Panel height
L +/- 2.5, +/- 5 Saddle flap length
V +/- 2, +/- 4 Saddle flap forward cut
KL +1, +2, +3 Gullet length

Warranty
Kentaur offers the following warranty on riding saddles:
• 5-year warranty on the saddle tree
• 2-year warranty on material defects and manufacturing flaws.