Kentaur Jumping Saddle Configurator HERMESO

Classic jumping saddle with a medium-deep seat and medium-high knee rolls. The wide padding in the front part of the saddle flap ensures comfort and a pleasant fixation above the knee.

Information on the configuration of Kentaur saddles

1. Saddle Trees

CARBON Saddle Tree
The tree consists of several layers. It ensures lightness, absolute dimensional stability, durability, strength, elasticity, and stability. It is thin yet has the ability to absorb shocks. This significantly improves contact between rider and horse. Replaceable and adjustable gullets, available in 5 sizes, in combination with this saddle tree, offer a unique and unparalleled product on the current global market.

GRP Saddle Tree
Alternatively, to the carbon tree, we offer the economical version. A saddle tree made purely from fiberglass, which is 300 g heavier but identical in shape and size to the carbon tree. It is reinforced with carbon and Kevlar fibers in the area of the point.

WEBFLEX Saddle Tree
The Webflex tree is a classic flexible saddle tree reinforced longitudinally with a steel spring. The gullet used here is interchangeable and adjustable.

2. Gullets

The saddle trees are reinforced with a metal gullet in the wither area. This reinforcement is interchangeable and adjustable. It is possible to change the width of the gullet (when cold), directly on the saddle, using a press machine, by a maximum of 2 cm. A larger bend can cause molecular changes that alter the material and reduce its strength.
Following gullet sizes:
1 - narrow 2 - medium 3 - medium-wide 4 - wide 5 - extra-wide
For the correct determination of the gullet size, we recommend the following steps:
1) Use a measuring wire to form the outline of the wither, approximately two fingers' width behind the rear edge of the shoulder blade.
2) Measure the inner angle size.

Chamber:
1 – Angle 63° 2 – Angle 73° 3 – Angle 83° 4 – Angle 93° 5 – Angle 99°
This measurement is only a guide and cannot be used for the production of a custom saddle.
The length of the gullet is the same for all sizes. However, it is possible to extend it by 1, 2, or 3 cm.

3. Saddle Panels

Panel Height
For horses with high withers and a deep backline, it is necessary to support the rear part of the saddle with higher saddle panels. It is possible to produce the wool panel with a standard wedge height or an increased wedge of +1, +2, or +3 cm.

Wool Panels
Full synthetic wool is used to fill the panels, adapting to the horse's back. This wool remains soft and flexible even after prolonged use. Wool-filled panels are very comfortable for the horse, have excellent absorption capabilities, and can be individually adjusted to the horse's back. Multiple layers under the wool ensure a smooth and even surface of the panels.
3mm LP foam reinforces the tensile strength of the leather.
10 mm PU foam gives the panel a pleasant softness.
5mm felt ensures higher stability of the panels.

Felt Panels (French)
The central part of these panels is filled with synthetic wool, wrapped in felt, and finally covered with leather. This type of panel is very comfortable for the horse and maintains its height (thickness) very well. It has no edge and can be individually shaped.

Latex Panels
The filling of the panel consists of polyurethane foam. The advantage of this panel is its property of offering riders close contact with the horse, and its shape does not change even after long-term use. The panel is not modifiable; it can only be adjusted to the horse's back with a pad.

4. Saddle Flaps

Saddle flaps of the jumping saddle
They have their standard size and cut on every model. On request, a larger forward cut of +2 cm or +4 cm can be ordered. A larger forward cut automatically increases the length of the saddle flap.

Saddle flaps of the dressage saddle

They have the same length on all models (measured from the lower stirrup bar edge to the end of the saddle flap).
Seat size 16.5" 17" 17.5" 18" 18.5"
Standard flap length 41 cm 43 cm 45 cm 47cm 49 cm

Upon customer request, it is possible to produce the saddle flap in a longer or shorter version, plus 2.5 cm, plus 5 cm, minus 2.5 cm or minus 5 cm.

5. Leather

Leather Qualities
Only high-quality hides from first-class Italian, German, and French tanneries are used for the production of our products. The following options are available:

Leather for saddle flaps:
1) Standard Leather - vegetable-tanned leather with a smooth surface
2) Country Leather - high-quality, oiled leather that is soft and non-slip. Also available in a printed version.
3) Double Calf Leather - consists of standard leather covered with soft calf leather. Very comfortable version.

6. Colors:

Most Kentaur saddles are available in the following colors:
• Black
• Dark Brown
• Tobacco

Saddle Identification

From January 2018, every Kentaur saddle is marked with the production number, size, gullet width, and additional information about its adjustment.
The first letter of the production number indicates the saddle tree type.
W / C / G (WEBFLEX / CARBON / GRP)

K +1, +2, +3 Panel height
L +/- 2.5, +/- 5 Saddle flap length
V +/- 2, +/- 4 Saddle flap forward cut
KL +1, +2, +3 Gullet length

Warranty
Kentaur offers the following warranty on riding saddles:
• 5 years warranty on the saddle tree
• 2 years warranty on material defects and manufacturing faults.