Trust Bit Sweet Iron Pelham French Link Copper Plate 16mm 13.5

Trust Bit Sweet Iron Pelham French Link Copper Plate 16mm 13.5

The bit is 16mm thick, measured at the thickest part in the area of the horse's lips. It is therefore a medium-thick mouthpiece.

For comparison, the standard thickness for a normal warmblood is between 16mm and 18mm. For ponies, this value is usually between 10mm and 14mm. Very large warmbloods, cold-blooded horses, and Shire Horses usually require a bit thicker than 18mm. A thickness of 12mm is usually suitable for a pony.

When choosing the bit thickness and size, pay attention to the anatomical characteristics of the horse's mouth. You can use your fingers to check how much space there is between the tongue and the palate.

The Trust Equestrian development team continuously works on innovative bits to further optimize the design and function of the bits. Today, we would like to introduce you to the Trust Bit Sweet Iron Pelham French Link Copper Plate 16mm 13.5 from the Trust Equestrian range in more detail:

The bit Trust Bit Sweet Iron Pelham French Link Copper Plate 16mm 13.5 is made of Sweet Iron and equipped with Pelham shanks. The mouthpiece of this bit is a French Link, which means an eight-shaped plate as the center piece of a double-jointed mouthpiece. The mouthpiece has a width of 13.5 centimeters.

Bit Thickness

The mouthpiece size 13.5cm is usually ideal for smaller and normal warmbloods.

Shank

Pelham

The Pelham is a popular bit with short or long shanks. When taking up the reins, the bit acts on the mouth, lower jaw, and poll. Depending on the leverage of the shanks, a varying degree of strong and immediate bit angle in the mouth can be achieved. Possible use for horses that have difficulty going on the bit, for "hot" horses, or also for horses that need significant influence in critical situations. The Pelham should only be used by experienced riders.

Mouthpiece

French Link

The French Link mouthpiece has two hinge points and an eight-shaped plate in the middle, which applies even pressure to the tongue. This mouthpiece is double-jointed, is shaped more towards the mouth and lies somewhat looser in the horse's mouth.

Bit Material

Sweet Iron

Sweet Iron bits are made of steel. The bits have been developed so that surface rust forms on contact with air and moisture. This tastes sweet and stimulates saliva production. Horses therefore readily accept Sweet Iron bits.

Manufacturer Information

Trust Equestrian

The Dutch bit manufacturer Trust Equestrian is characterized by innovation and craftsmanship. With the Inno Sense and Sweet Iron series, they are breaking new ground. The products are continuously developed by Trust's technical teams and strictly quality controlled.

In a nutshell

• Manufacturer: Trust Equestrian
• Material: Sweet Iron
• Side piece: Pelham
• Mouthpiece: French Link
• Hardness:
• Bit thickness: 16mm
• Size: 13.5cm