Trust Sweet Iron Loose Ring French Link Copper Plate 16mm 13.5

Trust Bit Sweet Iron Elevator Bit French Link Copper Plate 16mm 13.5

The bit is 16mm thick, measured at the thickest part in the horse's cheek area. So, it is a medium-thick mouthpiece.

For comparison, the standard thickness for a normal warmblood is between 16mm and 18mm. For ponies, this value is usually between 10mm and 14mm. Very large warmbloods, draft horses, and Shire Horses usually need a bit thicker than 18mm. A thickness of 12mm is usually suitable for a pony.

When choosing the bit thickness and size, pay attention to the anatomical conditions of the horse's mouth. You can test with your fingers how much space there is between the tongue and the palate.

The bit range from Trust Equestrian provides soft but effective impulses for better communication between rider and horse. We would like to introduce you to the Trust Bit Sweet Iron Elevator Bit French Link Copper Plate 16mm 13.5 from the Trust Equestrian range in more detail today:

The bit Trust Bit Sweet Iron Elevator Bit French Link Copper Plate 16mm 13.5 is made of Sweet Iron and equipped with Elevator Bit rings. The mouthpiece of this bit is a French Link, an eight-shaped plate as the center piece of a double-jointed mouthpiece. The mouthpiece has a size of 13.5 centimeters.

Bit thickness

This mouthpiece size is usually well suited for a normal warmblood.

Side piece

Elevator Bit

The elevator bit can be ridden with two reins. The second rein, with increased pressure, causes the bit to tip and pull up into the corners of the mouth. This means a reinforced effect. Very good for horses that tend to lean on the bit. The bit also supports the horse's natural self-carriage.

Mouthpiece

French Link

The French Link mouthpiece is a double-jointed mouthpiece with an eight-shaped plate in the middle that exerts even pressure on the tongue. This mouthpiece is double-jointed, is more shaped towards the mouth and sits a little looser in the horse's mouth.

Bit material

Sweet Iron

Trust's Sweet Iron bits are made of steel. The bits have been developed so that surface rust forms on contact with air and moisture. This tastes sweet and stimulates saliva production. Horses therefore readily accept Sweet Iron bits.

Manufacturer Information

Trust Equestrian

The Dutch bit manufacturer Trust Equestrian is characterized by innovation and craftsmanship. With the Inno Sense and Sweet Iron series, they are breaking new ground. The products are continuously developed by Trust's technical teams and strictly controlled for quality.

In a nutshell

• Manufacturer: Trust Equestrian
• Material: Sweet Iron
• Side part: Elevator Bit
• Mouthpiece: French Link
• Hardness:
• Bit thickness: 16mm
• Size: 13.5cm