Trust Sweet Iron 3-Ring Gag Bit, Double-Jointed with Copper Rings, 16mm, 12.5

Trust Bit Sweet Iron 3-Ring Snaffle Double-Jointed with Copper Rings 16mm 12.5

The bit is 20mm thick, measured at the thickest part in the horse's commissures. This makes it a rather thick mouthpiece.

For comparison, the standard thickness for a normal warmblood is between 16mm and 18mm. For ponies, this value is usually between 10mm and 14mm. Very large warmbloods, cold-blooded horses, and Shire Horses usually need a bit thicker than 18mm. A thickness of 12mm is usually suitable for a pony.

When choosing the bit thickness and size, pay attention to the anatomical conditions of the horse's mouth. You can use your fingers to test how much space there is between the tongue and the palate.

The Trust Equestrian development team continuously works on innovative products to further optimize the design and function of bits. Today we would like to introduce you to the Trust Bit Sweet Iron 3-Ring Snaffle Double-Jointed with Copper Rings 16mm 12.5 from the Trust Equestrian range in more detail:

The bit Trust Bit Sweet Iron 3-Ring Snaffle Double-Jointed with Copper Rings 16mm 12.5 is made of Sweet Iron and equipped with 3-ring cheeks. The mouthpiece of this bit is double-jointed. The mouthpiece has a size of 12.5 centimeters.

Bit Thickness

The mouthpiece size 12.5cm is usually ideal for Thoroughbreds.

Cheek Piece

3-Ring

The three-ring bit combines effective lateral limitation, leverage, and lifting action in one bit. The degree of action is chosen by the different rein attachment options. When attached to the lower ring, the taking rein exerts the effect of a short lever on the bit. The 3-ring bit is often used to test the horse's reaction to leverage.

Mouthpiece

Double-jointed

Double-jointed mouthpieces are suitable for many horses. This mouthpiece has two hinges, is more shaped towards the mouth, and sits a little looser in the horse's mouth. This bit exerts pressure on the tongue, the bars, and the corners of the mouth. Caution with narrow lower jaws! The joints can press on the bars if the lower jaw is narrow. Compared to a single-jointed bit, this bit exerts more pressure on the tongue.

Bit Material

Sweet Iron

Sweet Iron bits are made of steel. The bits are designed so that surface rust forms on contact with air and moisture. This tastes sweet and stimulates saliva production. Horses therefore readily accept Sweet Iron bits.

Manufacturer Information

Trust Equestrian

The Dutch bit manufacturer Trust Equestrian is characterized by innovation and craftsmanship. With the Inno Sense and Sweet Iron series, they are breaking new ground. The products are continuously developed by Trust's technical teams and strictly quality controlled.

In a Nutshell

• Manufacturer: Trust Equestrian
• Material: Sweet Iron
• Cheek piece: 3-Ring
• Mouthpiece: double-jointed
• Hardness:
• Bit thickness: 20mm
• Size: 12.5cm