Kentaur Jumping Saddle Configurator KRONOS ISB

This jumping saddle is in the professional category and is built on a flat tree. The panel consists of soft foam material with a firmer core, and the integrated sweat flap ensures optimal contact between the rider's legs and the horse. Memory foam is incorporated in the front area of the saddle flap. The seat and knee areas are made of non-slip calfskin.

Information on configuring Kentaur saddles

1. Saddle Trees

CARBON Saddle Tree
The tree consists of several layers. It ensures lightness, absolute dimensional stability, durability, strength, elasticity, and stability. It is thin yet possesses the ability to absorb shocks, significantly improving contact between rider and horse. Exchangeable and adjustable gullets, available in 5 sizes, combined with this saddle tree, offer a unique product on the current world market.

GRP Saddle Tree
Alternatively to the Carbon tree, we offer the economical version. A saddle tree made purely from fiberglass, which is 300 g heavier but identical in shape and size to the Carbon tree. It is reinforced with carbon and Kevlar fibers in the gullet area.

WEBFLEX Saddle Tree
The Webflex tree is a classic flexible saddle tree reinforced longitudinally with a steel spring. The gullet used here is exchangeable and adjustable.

2. Gullets

The saddle trees are reinforced in the wither area with a metal gullet. This reinforcement is exchangeable and adjustable. It is possible to change the width of the gullet (in a cold state), directly on the saddle, using a pressing machine, by a maximum of 2 cm. With a larger bend, molecular changes can occur, altering the material and reducing its strength.
Following gullet sizes
1 - narrow 2 - medium 3 – medium-wide 4 – wide 5 – extra-wide
For the correct determination of the gullet size, we recommend the following steps:
1) Using a measuring wire, form the outline of the withers approximately two finger widths behind the rear edge of the shoulder blade
2) Measure the internal angle

Chamber:
1 – Angle 63° 2 – Angle 73° 3 – Angle 83° 4 – Angle 93° 5 – Angle 99°
This measurement is only a guide and cannot be used for the production of a custom saddle.
The length of the gullet is the same for all sizes. However, it can be extended by 1, 2 or 3 cm.

3. Saddle Panels

Panel Height
For horses with high withers and a deep backline, it is necessary to support the rear area of the saddle with higher panels. It is possible to produce the wool panel with a standard wedge height or an increased wedge of +1, +2 or +3 cm.

Wool Panels
Fully synthetic wool is used to fill the panels, which conforms to the horse's back. This wool remains soft and flexible even after prolonged use. Wool-filled panels are very comfortable for the horse, have excellent absorption capabilities, and can be individually adapted to the horse's back. Multiple layers under the wool ensure a smooth and even surface of the panels.
3mm LP foam reinforces the tensile strength of the leather
10 mm PU foam gives the panel a pleasant softness
5mm felt ensures higher stability of the panels

Felt Panels (French)
The middle part of these panels is filled with synthetic wool, wrapped in felt, and finally covered with leather. This type of panel is very comfortable for the horse and maintains its height (thickness) very well. It has no edge and can be individually shaped.

Latex Panels
The panel filling consists of polyurethane foam. The advantage of this panel is that it offers riders close contact with the horse and its shape does not change even with long-term use. The panel is not adjustable; it can only be adapted to the horse's back with a pad.

4. Saddle Flaps

Jumping Saddle Flaps
They have their standard size and forward cut for each model. Upon request, a larger forward cut of +2 cm or +4 cm can be ordered. A larger forward cut automatically increases the length of the saddle flap.

Dressage Saddle Flaps

They have the same length on all models (measured from the lower stirrup bar edge to the end of the saddle flap).
Seat size                             16.5"       17"        17.5"       18"       18.5"
Standard flap length          41 cm    43 cm    45 cm    47cm    49 cm

Upon customer request, it is possible to produce the saddle flap in a longer or shorter version, plus 2.5 cm, plus 5 cm, minus 2.5 cm or minus 5 cm.

5. Leather

Leather Qualities
Only high-quality hides from first-class Italian, German, and French tanneries are used for the production of our products. The following options are available:

Leather for saddle flaps:
1) Standard Leather - vegetable-tanned leather with a smooth surface
2) Country Leather - high-quality, oiled leather that is soft and non-slip. Also available in a printed version.
3) Double Calfskin - consists of standard leather covered with soft calfskin. Very comfortable version.

6. Colors:

Most Kentaur saddles are available in the following colors:
• Black
• Dark Brown
• Tobacco

Saddle Identification

From January 2018, every Kentaur saddle is marked with the production number, size, gullet width, and additional information regarding its adjustment.
The first letter of the production number indicates the saddle tree type.
W / C / G (WEBFLEX / CARBON / GRP)

K     +1, +2, +3       Panel height
L     +/- 2.5, +/- 5   Saddle flap length
V     +/- 2, +/- 4      Saddle flap forward cut
KL   +1, +2, +3       Gullet length

Warranty
Kentaur offers the following warranty on riding saddles:
• 5 years warranty on the saddle tree
• 2 years warranty on material and manufacturing defects.